Radiotronix - Technical Support Site




	Application Notes



	Name:	RCT comunication to microcontroller
	Description:	The purpose of this application note is to


	Name:	Differences between EVM and FCC Modules
	Description:	The purpose of this application note is to address frequency asked questions (FAQs) from customers on which antenna and connector are matched to the appropriate module type and also to explain the differences between Radiotronix EVM and FCC modules.


	Name:	Wi.FS24-100ST™ Modular Certification Guidelines
	Description:	This guidance is for customers integrating the Radiotronix Wi.FS24-100ST™ (Wi.FreeStar™) into their application. The FCC requires testing for both Intentional and Unintentional Radiation from the final product configuration.


	Name:	Wi.232DTS™ Modular Certification Guidelines
	Description:	This guidance is for customers integrating any Radiotronix Wi.™ FCC series radios into their application. The FCC requires testing for both Intentional and Unintentional Radiation from the final product configuration.


	Name:	Differences between DTS and FHSS
	Description:	The purpose of this document is to assist customers in understanding the differences between the two main RF protocol modulations techniques used in Radiotronix embedded wireless radios.


	Name:	Wi.M900X/T™ Example Schematic
	Description:	Example schematic for WiM900X/T Modules


	Name:	AS/HP Remote Control Example Circuit
	Description:	Example 2-button remote control application circuit using the RCT-xxx-AS transmitter and RCR-xxx-HP receiver. updated 3/8/05


	Name:	AN401 "Channel Coding and Protocol Considerations for the EWM-900-FDTC"
	Description:	This applications note demonstrates a data encoding technique that can be used to send data with the RCT, EWM, and EWD modules

...End of application notes